Knowledge Base : Glossary : Suggest a Question
Search The Digitrax Knowledge Base
Browse The Digitrax Knowledge Base
Displaying Articles 1 - 15 of 15 In This Category
Welcome! (3)
Q&A (28)
LocoNet (17)
Zephyr (4)
Features (8)
Features (4)
Features (7)
Big Boy (4)
Boosters (4)
DCS50 (1)
DB150 (1)
DB200+ (6)
DCS100 (2)
DCS200 (1)
PM42 (2)
Hardware (6)
Q&A (11)
AR1 (11)
How do I Program Locomotive Decoders? (15)
N-Scale (37)
H0-Scale (38)
Z Scale (1)
FN04K1 (1)
SFX064D (9)
SFX0416 (5)
Resources (15)
DZ Series (1)
DH Series (1)
DN Series (1)
DG Series (2)
DG383AR (4)
DG583AR (3)
DG583S (7)
DS64 (1)
Hardware (16)
DS54 (1)
Hardware (12)
DS44 (1)
DS51K1 (6)
DS52 (8)
DM1 (2)
DS61K1 (2)
UP5 (9)
UR90 (5)
UR91 (8)
UR92 (10)
Throttles (2)
DT100 (4)
DT200 (3)
DT300 (45)
UT1 (5)
UT2 (2)
BD4 (8)
BDL168 (3)
Hardware (8)
RD2 (2)
SE8C (2)
Hardware (12)
Q&A (21)
PR3 (1)
Hardware (5)
Q&A (6)
PR2 (5)
MS100 (1)
PR1 (12)
Knowledge Base Home Page : Mobile Decoders : Locomotives : How do I Program Locomotive Decoders?
  1. Configuration Variables Used in Digitrax Decoders
    This is a list of all configuration variables (CV's) used with Digitrax mobile d...
  2. Programming overview
    The mobile decoder in your locomotive is usually default-set at the Factory with...
  3. Setting Up Ditch Lights with Digitrax FX Decoders
    Flashing ditch lights can be set up with several CV's. Using 1.5...
  4. What is a Programming Track?
    What is a programming track? It's a segment of track that's connected to the...
  5. Setting Up Scaleable Speed Stabilization (Back EMF) in Digitrax Decoders
    Speed stabilization is a feature that causes the decoder to run the locomoti...
  6. Changing a locomotive address with Zephyr
    This procedure is best done on a Service Mode programming track (please see rela...
  7. Programming with DT400 on a DB150 Empire Builder Command Station
    Your DCC decoders have many different configuration variables (CV's for shor...
  8. How do I test decoders using the LT-1?
    1. Strip the insulation from the red, green, black and yellow wires on the...
  9. Mars Light
    I have a DH163D decoder. How do I program it so the Mars light works? Any fun...
  10. Programming with DT400 on a DCS50 Zephyr or DCS100/200 Chief Command Station
    Your DCC decoders have many different configuration variables (CV's for short) t...
  11. Matching Speeds
    How do I get all the engines of a consist to run at the same speed? I have 3 eng...
  12. Speed Tables
    A speed table is a list of numbers, one number for each speed step. Many operat...
  13. 4-digit Addressing Formula
    Zephyr and systems using the DT400 will automatically program 4-digit addres...
  14. Can I configure a Kato F40PH to flash dual strobes alternately?
    How do I configure in my Kato F40PH to make the dual strobes work alternately (u...
  15. Configuration Variables Used in Digitrax Mobile Decoders
    CV #UseDecoderDefaultValueValueRange CV01AddressAll01-999901-127 $128-9999 $...
Powered By AutoKB