Knowledge Base : Glossary : Suggest a Question
Search The Digitrax Knowledge Base
Browse The Digitrax Knowledge Base
Displaying Articles 1 - 15 of 15 In This Category
Welcome! (3)
Q&A (28)
LocoNet (17)
Zephyr (4)
Features (8)
Programming Zephyr (15)
Features (4)
Features (7)
Big Boy (4)
Boosters (4)
DCS50 (1)
DB150 (1)
DB200+ (6)
DCS100 (2)
DCS200 (1)
PM42 (2)
Hardware (6)
Q&A (11)
AR1 (11)
N-Scale (37)
H0-Scale (38)
Z Scale (1)
FN04K1 (1)
SFX064D (9)
SFX0416 (5)
Resources (15)
DZ Series (1)
DH Series (1)
DN Series (1)
DG Series (2)
DG383AR (4)
DG583AR (3)
DG583S (7)
DS64 (1)
Hardware (16)
DS54 (1)
Hardware (12)
DS44 (1)
DS51K1 (6)
DS52 (8)
DM1 (2)
DS61K1 (2)
UP5 (9)
UR90 (5)
UR91 (8)
UR92 (10)
Throttles (2)
DT100 (4)
DT200 (3)
DT300 (45)
UT1 (5)
UT2 (2)
BD4 (8)
BDL168 (3)
Hardware (8)
RD2 (2)
SE8C (2)
Hardware (12)
Q&A (21)
PR3 (1)
Hardware (5)
Q&A (6)
PR2 (5)
MS100 (1)
PR1 (12)
Knowledge Base Home Page : Starter Sets : Zephyr : Programming Zephyr
  1. Zephyr - Option Switch Table
    You can customize the operation of your Zephyr. The following table shows the...
  2. Zephyr - Multiple Unit Locomotive Operations
    MU (Multiple Unit) Operations It is not uncommon to see two, three or eve...
  3. Zephyr - Setting Option Switches
    The DCS50 is set up at the factory to run right "out of the box", but the DC...
  4. Zephyr - Making DCS50 a Booster
    Digitrax operators who upgrade from Zephyr to larger systems can change Zeph...
  5. Zephyr - Reset to Factory Default
    To reset the DCS50 Option Switches to factory settings: If you change opt...
  6. Zephyr - Decoder Speed Step Settings
    The Digitrax DCS50 Zephyr is set at the factory to send 128 speed step comma...
  7. Zephyr - Status Editing
    You may find it necessary to change how Zephyr operates a particular locomot...
  8. Zephyr - Adding a Locomotive To An MU Consist
    To MU two addresses together with the DCS50 Zephyr: 1. Choose two locos y...
  9. Zephyr - Dispatching Locomotive Addresses or MU's
    Dispatching is a special feature incorporated in the LocoNet "language" to m...
  10. Zephyr - Removing A Locomotive From An MU Consist
    To remove a loco address from an MU consist: 1. On the DCS50, select the...
  11. Zephyr - Making Function 3 Non-latching
    The DCS50 Zephyr normally treats Function 3 as an on/off function unless you...
  12. Zephyr - "Stealing" a Locomotive
    Another way to describe "stealing" is "sharing"; it is a process where one o...
  13. Zephyr - Clearing All Locomotive Addresses and MU Consists
    You can clear all locomotive addresses and multiple unit consts from DCS50 Z...
  14. Zephyr - Controlling Functions On MU'ed Locomotives
    Even though an individual locomotive is part of an MU and you can’t control...
  15. Zephyr - Braking District?
    I have a Zephyr control station and I would like to set up a Braking Distric...
Powered By AutoKB